News

Mar 25, 2025

European Union's Plastics Pipes and Pipe Fittings Market to Maintain Steady Growth with +0.7% CAGR through 2035 - News and Statistics - IndexBox

Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform. IndexBox has just published a new report: EU - Plastics Pipes And Pipe Fittings - Market Analysis,

Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.

IndexBox has just published a new report: EU - Plastics Pipes And Pipe Fittings - Market Analysis, Forecast, Size, Trends and Insights.

The European Union's market for plastics pipes and pipe fittings is projected to continue growing with a CAGR of +0.7% in volume and +1.5% in value from 2024 to 2035. This growth trend is attributed to the increasing demand for these products in the region. By the end of 2035, the market volume is expected to reach 3.4M tons, with a market value of $18.2B.

Driven by increasing demand for plastics pipes and pipe fittings in the European Union, the market is expected to continue an upward consumption trend over the next decade. Market performance is forecast to decelerate, expanding with an anticipated CAGR of +0.7% for the period from 2024 to 2035, which is projected to bring the market volume to 3.4M tons by the end of 2035.

In value terms, the market is forecast to increase with an anticipated CAGR of +1.5% for the period from 2024 to 2035, which is projected to bring the market value to $18.2B (in nominal wholesale prices) by the end of 2035.

Plastics pipe and pipe fitting consumption surged to 3.1M tons in 2024, growing by 20% compared with the previous year. The total consumption volume increased at an average annual rate of +1.8% over the period from 2013 to 2024; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The volume of consumption peaked at 3.6M tons in 2022; however, from 2023 to 2024, consumption remained at a lower figure.

The revenue of the market for plastics pipes and pipe fittings in the European Union soared to $15.5B in 2024, rising by 62% against the previous year. This figure reflects the total revenues of producers and importers (excluding logistics costs, retail marketing costs, and retailers' margins, which will be included in the final consumer price). Over the period under review, consumption continues to indicate a relatively flat trend pattern. Over the period under review, the market reached the peak level at $20.8B in 2022; however, from 2023 to 2024, consumption failed to regain momentum.

The countries with the highest volumes of consumption in 2024 were Spain (442K tons), Italy (433K tons) and Poland (360K tons), with a combined 40% share of total consumption. Germany, France, the Netherlands, Belgium, Sweden, Denmark and Finland lagged somewhat behind, together comprising a further 40%.

From 2013 to 2024, the biggest increases were recorded for the Netherlands (with a CAGR of +8.3%), while consumption for the other leaders experienced more modest paces of growth.

In value terms, Germany ($2.7B), Italy ($2.3B) and France ($2B) appeared to be the countries with the highest levels of market value in 2024, together accounting for 45% of the total market. Poland, Spain, the Netherlands, Denmark, Sweden, Finland and Belgium lagged somewhat behind, together accounting for a further 36%.

The Netherlands, with a CAGR of +5.9%, saw the highest rates of growth with regard to market size among the main consuming countries over the period under review, while market for the other leaders experienced more modest paces of growth.

The countries with the highest levels of plastics pipe and pipe fitting per capita consumption in 2024 were Denmark (18 kg per person), Finland (17 kg per person) and Sweden (12 kg per person).

From 2013 to 2024, the biggest increases were recorded for the Netherlands (with a CAGR of +7.9%), while consumption for the other leaders experienced more modest paces of growth.

In 2024, after two years of decline, there was significant growth in production of plastics pipes and pipe fittings, when its volume increased by 17% to 3.1M tons. Overall, production showed a relatively flat trend pattern. The volume of production peaked at 3.7M tons in 2021; however, from 2022 to 2024, production stood at a somewhat lower figure.

In value terms, plastics pipe and pipe fitting production surged to $16.2B in 2024 estimated in export price. Over the period under review, production, however, showed a relatively flat trend pattern. Over the period under review, production attained the peak level at $22.1B in 2021; however, from 2022 to 2024, production failed to regain momentum.

The countries with the highest volumes of production in 2024 were Italy (542K tons), Spain (473K tons) and Germany (443K tons), with a combined 48% share of total production.

From 2013 to 2024, the biggest increases were recorded for Spain (with a CAGR of +3.1%), while production for the other leaders experienced more modest paces of growth.

In 2024, supplies from abroad of plastics pipes and pipe fittings decreased by -20.3% to 945K tons, falling for the second consecutive year after ten years of growth. In general, imports, however, showed a relatively flat trend pattern. The most prominent rate of growth was recorded in 2021 when imports increased by 17%. Over the period under review, imports reached the peak figure at 1.4M tons in 2022; however, from 2023 to 2024, imports failed to regain momentum.

In value terms, plastics pipe and pipe fitting imports shrank sharply to $5.6B in 2024. Total imports indicated perceptible growth from 2013 to 2024: its value increased at an average annual rate of +2.2% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2024 figures, imports decreased by -21.2% against 2022 indices. The most prominent rate of growth was recorded in 2021 when imports increased by 28% against the previous year. The level of import peaked at $7.1B in 2022; however, from 2023 to 2024, imports failed to regain momentum.

The purchases of the three major importers of plastics pipes and pipe fittings, namely France, Germany and Belgium, represented more than third of total import. Spain (58K tons) ranks next in terms of the total imports with a 6.1% share, followed by Sweden (5.6%) and the Czech Republic (4.6%). The following importers - the Netherlands (41K tons), Romania (40K tons), Italy (39K tons) and Denmark (36K tons) - each recorded a 16% share of total imports.

From 2013 to 2024, the most notable rate of growth in terms of purchases, amongst the main importing countries, was attained by Spain (with a CAGR of +9.6%), while imports for the other leaders experienced more modest paces of growth.

In value terms, the largest plastics pipe and pipe fitting importing markets in the European Union were Germany ($1B), France ($610M) and Belgium ($435M), together comprising 37% of total imports. Spain, Italy, the Netherlands, the Czech Republic, Sweden, Romania and Denmark lagged somewhat behind, together accounting for a further 34%.

In terms of the main importing countries, Spain, with a CAGR of +7.2%, saw the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.

In 2024, plastic fittings for tubes, pipes and hoses (294K tons) and rigid tubes, pipes and hoses of polymers of ethylene (266K tons) represented the main types of plastics pipes and pipe fittings in the European Union, together reaching near 61% of total imports. It was distantly followed by rigid tubes, pipes and hoses of polymers of vinyl chloride (176K tons), rigid tubes, pipes and hoses of polymers of propylene (108K tons) and rigid tubes, pipes and hoses, of other polymers (82K tons), together mixing up a 39% share of total imports.

From 2013 to 2024, the biggest increases were recorded for plastic fittings for tubes, pipes and hoses (with a CAGR of +2.1%), while purchases for the other products experienced more modest paces of growth.

In value terms, plastic fittings for tubes, pipes and hoses ($2.8B) constitutes the largest type of plastics pipes and pipe fittings imported in the European Union, comprising 53% of total imports. The second position in the ranking was held by rigid tubes, pipes and hoses of polymers of ethylene ($908M), with a 17% share of total imports. It was followed by rigid tubes, pipes and hoses, of other polymers, with a 14% share.

From 2013 to 2024, the average annual growth rate of the value of plastic fittings for tubes, pipes and hoses imports stood at +1.9%. With regard to the other imported products, the following average annual rates of growth were recorded: rigid tubes, pipes and hoses of polymers of ethylene (+1.9% per year) and rigid tubes, pipes and hoses, of other polymers (+2.8% per year).

The import price in the European Union stood at $5,938 per ton in 2024, remaining constant against the previous year. Over the last eleven years, it increased at an average annual rate of +1.3%. The most prominent rate of growth was recorded in 2023 an increase of 16% against the previous year. The level of import peaked in 2024 and is expected to retain growth in years to come.

There were significant differences in the average prices amongst the major imported products. In 2024, the product with the highest price was plastic fittings for tubes, pipes and hoses ($9,648 per ton), while the price for rigid tubes, pipes and hoses of polymers of vinyl chloride ($2,474 per ton) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by rigid tubes, pipes and hoses, of other polymers (+4.8%), while the other products experienced more modest paces of growth.

The import price in the European Union stood at $5,938 per ton in 2024, therefore, remained relatively stable against the previous year. Over the last eleven-year period, it increased at an average annual rate of +1.3%. The most prominent rate of growth was recorded in 2023 when the import price increased by 16%. Over the period under review, import prices hit record highs in 2024 and is expected to retain growth in the near future.

Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Germany ($9,333 per ton), while Sweden ($3,735 per ton) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by the Netherlands (+5.2%), while the other leaders experienced more modest paces of growth.

For the third year in a row, the European Union recorded decline in overseas shipments of plastics pipes and pipe fittings, which decreased by -26.1% to 906K tons in 2024. Overall, exports showed a perceptible decrease. The most prominent rate of growth was recorded in 2021 with an increase of 9.4%. As a result, the exports attained the peak of 1.4M tons. From 2022 to 2024, the growth of the exports remained at a lower figure.

In value terms, plastics pipe and pipe fitting exports declined sharply to $6.3B in 2024. In general, exports, however, showed a relatively flat trend pattern. The pace of growth appeared the most rapid in 2021 with an increase of 21% against the previous year. As a result, the exports attained the peak of $8.3B. From 2022 to 2024, the growth of the exports remained at a lower figure.

In 2024, Germany (197K tons), Italy (148K tons), Poland (99K tons) and Spain (89K tons) was the largest exporter of plastics pipes and pipe fittings in the European Union, creating 59% of total export. It was distantly followed by the Netherlands (47K tons), making up a 5.2% share of total exports. The Czech Republic (33K tons), Austria (31K tons), Romania (28K tons), Portugal (28K tons) and Denmark (28K tons) held a relatively small share of total exports.

From 2013 to 2024, the most notable rate of growth in terms of shipments, amongst the main exporting countries, was attained by Romania (with a CAGR of +2.7%), while the other leaders experienced more modest paces of growth.

In value terms, Germany ($1.9B) remains the largest plastics pipe and pipe fitting supplier in the European Union, comprising 29% of total exports. The second position in the ranking was taken by Italy ($786M), with a 12% share of total exports. It was followed by Poland, with a 9.1% share.

In Germany, plastics pipe and pipe fitting exports plunged by an average annual rate of -1.2% over the period from 2013-2024. In the other countries, the average annual rates were as follows: Italy (-0.6% per year) and Poland (+0.0% per year).

In 2024, rigid tubes, pipes and hoses of polymers of ethylene (273K tons), plastic fittings for tubes, pipes and hoses (205K tons), rigid tubes, pipes and hoses of polymers of vinyl chloride (203K tons) and rigid tubes, pipes and hoses of polymers of propylene (146K tons) represented the largest type of plastics pipes and pipe fittings in the European Union, committing 90% of total export. It was distantly followed by rigid tubes, pipes and hoses, of other polymers (94K tons), mixing up a 10% share of total exports.

From 2013 to 2024, the most notable rate of growth in terms of shipments, amongst the key exported products, was attained by rigid tubes, pipes and hoses of polymers of propylene (with a CAGR of -0.2%), while the other products experienced a decline in the exports figures.

In value terms, plastic fittings for tubes, pipes and hoses ($3.1B) remains the largest type of plastics pipes and pipe fittings supplied in the European Union, comprising 49% of total exports. The second position in the ranking was taken by rigid tubes, pipes and hoses, of other polymers ($1.1B), with a 17% share of total exports. It was followed by rigid tubes, pipes and hoses of polymers of ethylene, with a 16% share.

From 2013 to 2024, the average annual rate of growth in terms of the value of plastic fittings for tubes, pipes and hoses exports amounted to +1.3%. For the other products, the average annual rates were as follows: rigid tubes, pipes and hoses, of other polymers (+0.4% per year) and rigid tubes, pipes and hoses of polymers of ethylene (-0.2% per year).

The export price in the European Union stood at $6,999 per ton in 2024, with an increase of 5.4% against the previous year. Over the period from 2013 to 2024, it increased at an average annual rate of +2.6%. The pace of growth appeared the most rapid in 2023 when the export price increased by 11% against the previous year. The level of export peaked in 2024 and is expected to retain growth in the immediate term.

Prices varied noticeably by the product type; the product with the highest price was plastic fittings for tubes, pipes and hoses ($15,047 per ton), while the average price for exports of rigid tubes, pipes and hoses of polymers of vinyl chloride ($2,709 per ton) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by rigid tubes, pipes and hoses, of other polymers (+6.4%), while the other products experienced more modest paces of growth.

In 2024, the export price in the European Union amounted to $6,999 per ton, picking up by 5.4% against the previous year. Over the last eleven years, it increased at an average annual rate of +2.6%. The most prominent rate of growth was recorded in 2023 an increase of 11%. Over the period under review, the export prices hit record highs in 2024 and is likely to see steady growth in the near future.

Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Austria ($10,933 per ton), while Portugal ($3,277 per ton) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by the Netherlands (+9.2%), while the other leaders experienced more modest paces of growth.

Source: IndexBox Market Intelligence Platform

This report provides an in-depth analysis of the market for plastics pipe and pipe fitting in the EU. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.

This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:

While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.

Making Data-Driven Decisions to Grow Your Business

A Quick Overview of Market Performance

Understanding the Current State of The Market and Its Prospects

Finding New Products to Diversify Your Business

Choosing the Best Countries to Establish Your Sustainable Supply Chain

Choosing the Best Countries to Boost Your Exports

The Latest Trends and Insights into The Industry

The Largest Importers on The Market and How They Succeed

The Largest Exporters on The Market and How They Succeed

The Largest Producers on The Market and Their Profiles

The Largest Markets And Their Profiles